China"s "Eleventh Five Year" Plan pointed out that to build a resource saving and environment friendly society, focusing on the development of circular economy has insisted on developing equal emphasis on conservation, conservation priority, according to reduction, re use, resource oriented principle, resource extraction, production of consumption, waste generation, consumption and other sectors, and gradually establish the resources of society as a whole recycling system; to save energy, water conservation, saving land, saving materials and strengthening the comprehensive utilization of resources to strengthen the promotion of conservation policies. Machinery manufacturing industry from the simple pursuit of scale and efficiency of the model to build 4R cycle of economic direction.

For the natural environment and achieve the harmonious development of the required mining machinery "eco", with the help of advanced technologies on manufacturing model, manufacturing resources, manufacturing, process manufacturing organizations continually innovate to make our products throughout the life cycle does not produce environmental pollution or environmental pollution minimize the maximum utilization of resources, the lowest energy consumption, and ultimately corporate co ordination of economic and social benefits. Efficient, zero emission fuel cell mining machinery has good development prospects. Geothermal energy as green, renewable resources has been identified as countries around the world to maintain social sustainable development, new energy, the geothermal resource rich developed countries have been a better use of resources and the development of crustal heat treatment of solid waste resources for the Mining Machinery expanded its service areas. Mining machinery in the computer technology, network technology, multi disciplinary integrated support for economic development, driven by demand in the market, in the harmonious development of mankind and nature, the mining machinery has been upgraded to digital, intelligent, ecological and pleasant oriented direction.

Therefore, the state owned mining machinery plant in Henan With this favorable opportunity, and vigorously develop new products and equipment, such as coarse broken jaw breaking series of mobile crushing machines, broken the back breaking series of mobile crushing machine, crushing cone breaking series of mobile crushing machines, MTW European edition trapezoidal milling machine, large vertical milling machine, CS cone crusher, the EU version of JC series of jaw crusher (jaw crusher), VSI New Type Sand, 5X Series New Sand (system of sand machine), large scale hydraulic milling machine, and so a number of high gold content of the mining machinery and equipment, specifically for the current needs of the natural environment and national construction standards used in aggregate research and development, and is widely used in key national highways, railway engineering projects, including water conservancy, hydropower and other industries strong advantage, especially the European version of trapezoidal vertical milling machine and a large flour mill with a typical representative of the two mill products, popular with all major cement welcome and favor, is the only energy saving and environmentally friendly cement by the best equipment.

The development of a mining machinery of the technological progress of mankind, modern science and technology and is closely related to the overall industrial level, particularly with the mechanical engineering sciences and closely linked to the development of mining disciplines. Forefront of modern science and technology has obvious time domain, area, and dynamic properties. Information science, materials science, life science, nano science, management science and manufacturing science are changing the 21st century; mainstream science, the resulting high tech and the industry will change the world.

The intersection between the integration of different scientific will generate new scientific focus, economic development and social progress of the mining machinery to generate new demands and expectations. Mechanical Engineering, the general trend of scientific development will be digital, intelligent, precision, miniaturization, life oriented, and ecological. Mining machinery, as a branch of mechanical engineering disciplines, but also follows this general trend. At the same time, combining the characteristics of mining industry and its development trend is the digital, intelligent, and ecological and amenity oriented. Mining machinery manufacturing industry should continue to integrate into the human outstanding achievements in various fields, facing the major national economic development needs of the scientific outlook on development as guidance, to achieve sustainable development.

The overall level of China’s mining machinery, compared with the international advanced level there are still gaps. In the run mining machinery manufacturing power journey, opportunities and challenges coexist. Product design is the soul of the manufacturing industry, product structure, function, quality, cost, delivery time and manufacturability, maintainability, and disposal post processing, and human, machine and environment relationship, in principle, are in the product design stage decision. Product innovation and design capability has become a deciding the status of global competition in the primary factor.

Mining Machinery is a high technological content and integration of equipment, development of new equipment constantly results in all areas of human integration in, along with materials science, manufacturing technology, information technology, computer technology, each product has a into new technologies, parts and components updates become shorter and shorter, faster and faster replacement of new equipment, in particular the development of large scale mining machinery, non mature experience to draw on, but the design does not allow any mistakes and must therefore be With the integration of multi-disciplinary technologies to improve design efficiency and design quality, enhance corporate capability of independent innovation and market competitiveness. Mining machinery and computer technology, network technology, based on the formation of an integrated digital technology trends. As the professional manufacturer of complete sets of mining machinery, such as  hammer crusher and ore beneficiation machine, Henan Hongxing is  always doing the best in products and service. 

I have received several emails this week asking my thoughts on the current price action in precious metals. Some subscribers are asking how low gold and silver might go in the short term and my honest response is “I have no idea.” Anyone that claims they can predict the short-term price movements in a market as manipulated as this one is blowing hot air. The banks can utilize leveraged paper contracts to take gold down to $1,200 and silver to $20 if they want to, in the short term.

However, they absolutely can not keep prices this low for very long, as free market forces will bring things back into equilibrium. In fact, recent take down attempts have been met rather quickly with buying from strong hands, much of it likely coming from China. While I still believe that the manipulators can create rather substantial take downs that scare weak hands out of their positions in the short term, they are becoming less effective and more impotent each day. This has been obvious in the charting, where buyers are stepping up to take advantage of these paper-driven artificial sell offs. I view this manipulation of paper prices as insignificant. Whether gold falls to $1,200 or only drops to $1,600 and bounces, I have no doubt it will continue to preserve wealth and continue to increase the purchasing power of those holding it over time.

I believe it is important not to give into emotions during corrections such as these. If you have been staring at your computer screen and stressing the price action this week, you are doing yourself a great disservice. I would suggest that your focus should be mustering the strength to stick with your convictions, ignore the noise and keep your eye on the longer-term picture. I see nothing wrong with hedging via put options or inverse ETFs, but I’ve found it easier and more effective to simply hold onto core positions and buy the dips.

I am convinced that gold and silver will eclipse their previous inflation-adjusted highs before this bull market is over. This means that gold will climb above $2,400 and silver above $150 at an absolute minimum. If we use more realistic inflation numbers such as those calculated by John Williams of Shadow Stats, the true inflation-adjusted highs are more than triple the prices listed above. Whether gold climbs to $8,890 and silver to $517 remains to be seen, but I believe we are likely to see the lower price targets listed above within the next 12 to 18 months.

If you agree with this assessment of the situation, then there is no reason to be concerned when silver falls by 5% or 10% in a week. When silver is trading anywhere from $150 to $517 per ounce, will it matter much if you bought at $30 or $35? Will the temporary decline that we are currently experiencing have any meaning at all? As the professional manufacturer of complete sets of mining machinery, such as jaw crusher and Impact crusher, Henan Hongxing is always doing the best in products and service.

I have received several emails this week asking my thoughts on the current price action in precious metals. Some subscribers are asking how low gold and silver might go in the short term and my honest response is “I have no idea.” Anyone that claims they can predict the short-term price movements in a market as manipulated as this one is blowing hot air. The banks can utilize leveraged paper contracts to take gold down to $1,200 and silver to $20 if they want to, in the short term.

However, they absolutely can not keep prices this low for very long, as free market forces will bring things back into equilibrium. In fact, recent take down attempts have been met rather quickly with buying from strong hands, much of it likely coming from China. While I still believe that the manipulators can create rather substantial take downs that scare weak hands out of their positions in the short term, they are becoming less effective and more impotent each day. This has been obvious in the charting, where buyers are stepping up to take advantage of these paper-driven artificial sell offs. I view this manipulation of paper prices as insignificant. Whether gold falls to $1,200 or only drops to $1,600 and bounces, I have no doubt it will continue to preserve wealth and continue to increase the purchasing power of those holding it over time.

I believe it is important not to give into emotions during corrections such as these. If you have been staring at your computer screen and stressing the price action this week, you are doing yourself a great disservice. I would suggest that your focus should be mustering the strength to stick with your convictions, ignore the noise and keep your eye on the longer-term picture. I see nothing wrong with hedging via put options or inverse ETFs, but I’ve found it easier and more effective to simply hold onto core positions and buy the dips.

I am convinced that gold and silver will eclipse their previous inflation-adjusted highs before this bull market is over. This means that gold will climb above $2,400 and silver above $150 at an absolute minimum. If we use more realistic inflation numbers such as those calculated by John Williams of Shadow Stats, the true inflation-adjusted highs are more than triple the prices listed above. Whether gold climbs to $8,890 and silver to $517 remains to be seen, but I believe we are likely to see the lower price targets listed above within the next 12 to 18 months.

If you agree with this assessment of the situation, then there is no reason to be concerned when silver falls by 5% or 10% in a week. When silver is trading anywhere from $150 to $517 per ounce, will it matter much if you bought at $30 or $35? Will the temporary decline that we are currently experiencing have any meaning at all? As the professional manufacturer of complete sets of mining machinery, such as jaw crusher and Impact crusher, Henan Hongxing is always doing the best in products and service.

A model for analysis and monitoring of energy consumption was made at the Department of Surface Mining, Faculty of Mining and Geology in Belgrade, headed by Prof. dr Radomir Simic. The model consists of four main blocks as follows: analytic block for structural design, analytic block for project design, correction for technological block and a block for existing technological process. The mentioned blocks permit that within a model zone, where analysis and preparation works are carried out, constructive and project designs are studied with the aim to estimate the installed power at machines, then working and technological parameters, as well as the adjustment of natural factors with the opening of the pit. In case the solutions within the construction and the project are correct, they are applied at the block of the existing technological process, namely the zone of the input data. The main part of the model represents the determining of standards and recording, thus allowing computer preparation and modelling in the coding and modelling zone. The final part of the model represents the zone of optimization and output data where the technological, spatial and organizational parameters are optimized and where the realized specific energy consumption and the economic effects are determined.

Elaboration of the said models was carried out by dr Miodrag Gomilanovid in the conditions of the “Potrlica” coal open pit mine in the Pljcvlja coal basin. The annual coal capacity of the “Potrlica” coal open pit mine is 1.5 million tons, and 6.1 million m3 of overburden. The pit belongs to a deep type having exceptionally complex exploitation conditions. The complexity of conditions is determined by: depth of occurrence and angle of inclination of coal scam, properties of overburden, foot wall and coal seam with partings, strong presence of ground and surface waters, pronounced geomechanical problems, problems of storing the excavated overburden, seismically effects on the town of Pljevlja and other settlements. All those conditions determined the technology which during the process of excavating, loading and transportation of coal appears as discontinues, while it is combined in the process of overburden transportation.

Excavation of overburden and interlayer tailing is carried out at several levels from 5 to 15 meters, in high and depth, by bucket dredgers and draglines, with shovel bucket volume from 4 to 15 m3. Prior to excavation, drilling-blasting works on coal are performed as well as the works on interlayer tailing in almost entire hanging wall – overburden. Only the surface part of overburden, composed of humus and alluvial (pebble, sand and clay) is not blasted. As a leading global manufacturer of crushing and milling equipment, we offer advanced, rational solutions for any size-reduction requirements, including quarry, aggregate, grinding production and complete stone crushing station. We also supply individual jaw crusher and Raymond mill as well as spare parts of them.

Transportation of overburden, within the limits of the open pit surface itself, to internal waste dump and crushing equipment is carried out by dumper capacity from 50 to 70 t, and volume of loading frame from 30 to 50 m3. Transportation of overburden to the external deposit is carried out by belts with previous crushing of material by crushers. At the present stage of exploitation, six transporters were installed, three of which being permanent and three mobile, in a total length of around 4500 m. The said transportation system also consists of below-level dump stackers and above- level dump stackers having the capacity adjusted to transporters. Coal transportation from open pit mine to crushing and separation plant is also performed by dumpers capacity of 36 t, volume frame of 26 m’. In this plant classification of coal is made depending on its market purpose.

Environmental concerns will continue to affect mining operations. Increasingly, government regulations are restricting access to land and restricting the type of mining that is performed in order to protect native plants and animals and decrease the amount of water and air pollution. As population growth expands further into the countryside, new developments compete with mine operators for land, and residents are increasing their opposition to nearby mining activities. These concerns, together with depletion of the most accessible coal deposits in the East, will result in a shift in coal production. Coal mining will increase in the Central, and particularly the Western, United States and decrease in the East. Overall, coal mining employment is expected to grow by 4 percent as rising demand for coal is coupled with limited productivity gains from more efficient and automated production operations.

Employment in mining for metal ores is expected to decline by 10 percent through 2018. Because metals are used primarily as raw materials by other industries, such as telecommunications, construction, steel, aerospace, and automobile manufacturing, the strength of the metal ore mining industry is greatly affected by the strength of these industries. Most metals are sold and bought in a world market, so demand stems not only from domestic industries but also from fast growing industries in developing countries. Demand from these countries has caused prices for many metals to increase substantially in recent years. This has caused st1:country-region w:st="on" U.S. mining companies to expand production at existing mines and restart production at some mines that were closed when low metal prices made them unprofitable. However, in the long term the potential stabilization of prices together with many of the same environmental concerns as in coal mining will cause employment in metal ore mining to decline.

Nonmetallic mineral mining should experience little change in employment. Although demand will continue to increase for crushed stone, sand, and gravel used in construction activities, advances in mining technology will require fewer workers for operation and maintenance of new mining machines. Like the metal ore mining industry, the nonmetallic mineral mining industry is influenced by the strength of the industries that use its outputs in the manufacture of their products. Nonmetallic minerals are used to make concrete and asphalt for road construction and also as materials in residential and nonresidential building construction.

Transportation costs for stone, sand, and gravel are high, so mining of these materials is spread across the country, making it not as susceptible to industry consolidation. This geographical spread, together with the small size of many mines, also causes some mines to operate only during warm months. Many workers laid off during the winter find jobs in other industries and must be replaced when the mines reopen. Jobs in nonmetallic mineral mining attract many migrant workers and those looking for summer employment.

Despite an overall decline in mining industry employment, there will be job opportunities in most occupations due to the need to replace workers who leave the industry. A large number of workers, particularly in the professional occupations, will become eligible for retirement in the coming years, and some companies may have trouble coping with the loss of many experienced workers to retirement at a time when the industry is expanding production on dryer machine and ball mill machines. At the same time, past declines in employment in the industry have dissuaded potential workers from considering employment in the industry, and many colleges and universities have shut down programs designed to train professionals for work in mining. Employment opportunities will be best for those with previous experience and with technical skills, especially qualified professionals and extraction workers who have experience in oil field operations and who can work with new technology.

Many people might think of Genzink Steel as a local steel supplier, welding company and erector of steel frame buildings. That view would have fit the company up to the turn of the 21st century, but since then, the 50-year-old fabricator has shifted its focus more to companies outside the state and region in a range of growth industries.

“People would be surprised how much out-of-state and out-of-country work we do — and the companies we work for,” Ken Genzink, president of the company and son of founder Donald Genzink, told MiBiz in an exclusive interview. “We work with top-grade international companies.” The company got its start at the family’s farm in Holland, where it made clothesline poles and crates for hog farmers and performed welding jobs for customers around the area. He got its first big break making machine bases for Prince Corp. and others in the die industry. Building off that success and capitalizing on the manufacturing boom, the business started a structural steel division and had a part in the construction of many local plants, which led to additional contracts for maintenance and various steel items for the shop floor, ranging from bridge cranes to mezzanines, he said. “In the late ’80s and ’90s was when things really started to grow,” he said.

Another major shift, both in terms of industries served and how their partners with other companies, occurred when the company started building mining shuttle cars for Joy Mining Machinery, a major manufacturer of “the Cadillac of mining equipment,” said John Maxson, COO of this Steel and the manager of the shuttle car project. That he was able to meet Joy’s high standards of workmanship and on-time project deliveries led the Holland supplier to work with other segments of the mining industry. “They said that if you’re able to work with Joy, you’re the type of company we’d like to work with,” Maxson said, noting the project helped hem secure business with major public companies including the likes of Halliburton, FMC Technologies and Wärtsilä. It is now beginning to target private mining companies. “The focal point has been around our core competencies in heavy duty, complex fabrication. … The value we bring isn’t something they can get in their backyard, and that’s surprised us as the days go on. We ask ourselves, aren’t there someone between their local area and Holland that could do what we do? It’s a testament to the quality of people we have here, our discipline of process flow, and making and holding people accountable.”

He excels by delivering consistency on low- to medium-volume projects. Taking a page out of the auto industry, it aimed to deliver high standards for production in industries that did not normally demand such exacting quality, Maxson said. In many cases, they were leading their customers’ expectations higher, and that led him to be considered a preferred supplier-to the point where customers are looking to move new hammer crusher products to the company or place them there from other ore beneficiation machines suppliers.

Innovation is the creation of better or more effective products, processes, services, technologies, or ideas that are accepted by markets, governments, and society. Innovation differs from invention in that innovation refers to the use of a new idea or method, whereas invention refers more directly to the creation of the idea or method itself.

In business and economics, innovation is the catalyst to growth. With rapid advancements in transportation and communications over the past few decades, the old world concepts of factor endowments and comparative advantage which focused on an area’s unique inputs are outmoded for today’s global economy. Economist Joseph Schumpeter, who contributed greatly to the study of innovation, argued that industries must incessantly revolutionize the economic structure from within, that is innovate with better or more effective processes and products, such as the shift from the craft shop to factory. He famously asserted that “creative destruction is the essential fact about capitalism. In addition, entrepreneurs continuously look for better ways to satisfy their consumer base with improved quality, durability, service, and price which come to fruition in innovation with advanced technologies and organizational strategies.

Machinery industry is one of the industries that directly related to the level of industrialization, China is already the mining machinery manufacturing, but the industrial power want to develop, needs to experience a very long time. Machinery industry is a pillar of the industry, is the state supported and promoted industry, and as the main industry of mining machinery, crusher machine industry benefit. Of course, our ultimate goal is hope China’s machinery industry can place on the international stage, but it also has a process, not unrealistic expectations, first need to gain a firm foothold in the domestic arena. Many factories engaged in the machinery industry in our country, between each other is fierce competition.

However, not all products are the same quality, this requires the investor to purchase equipment in the process of polish his eyes, choose the most appropriate equipment. Based on domestic, crusher manufacturers need to be actively looking for domestic tourists and put the main business on the domestic, while the object is to focus on some of the more remote areas in the country the development of relatively backward areas, these areas requires the construction of roads, railways and etc. some mountainous areas also need to develop their own mining, will required the jaw crusher, cone and hammer type crusher, ball mill and other stone crushing machines in great demand. Conclude, the development of any industry can not be completed overnight, as well as crusher industry, companies need to constantly adhere to a long time, slow accumulation of experience, do well the brand strategy, in the changing market occupied a large share.

New-energy vehicles have been made exempt from the annual vehicle and vessel tax, the Ministry of Finance announced yesterday, as part of the government"s effort to boost the use of green vehicles in China.

"The move indicates that the government is hoping to guide consumers toward purchasing low energy consumption vehicles, and shows a supporting attitude to China"s new-energy auto sector," Zhang Yu, managing director of Shanghai-based Automotive Foresight Co, told the Global Times yesterday. However, Zhang noted that the vehicle tax for cars with engine capacities of up to 2.0 liters (accounting for the majority of domestic cars) is only some 400 yuan ($63.38) each year, which means the policy may not be a very strong stimulus for sales of new-energy vehicles.

Currently, new-energy cars are still not widely accepted by Chinese consumers. In 2011, only around 8,100 new-energy vehicles were sold nationwide, compared with a total of 18 million vehicles sold in the domestic auto market during the same year. Earlier this week, the Ministry of Science and Technology released a five-year plan to guide the development of the country"s new-energy vehicles. The plan said that electricity-powered vehicles will account for a majority of new-energy vehicles by 2020.

However, analysts noted that progress in battery technologies and construction of charging stations will be vital for domestic new-energy producers, and it remains unlikely that the sector will gain a strong foothold any time soon. "A car battery can only last for cruising 300 to 400 kilometers, which will be very inconvenient for consumers if there are not enough charging stations. Besides, an electricity-powered car and hammer crusher may cost twice the price of a regular car, something that has put off many consumers," said Zhang. Zeng Zhiling, an auto analyst at Shanghai-based LMC Automotive, said that a reduction in the vehicle purchase tax, which currently accounts for 10 percent of a car"s price, would serve as a much more effective incentive for the sector.

Zeng noted that it is still hard for new-energy vehicles to get accepted by most consumers, and that to reduce prices and improve sand maker technologies will be the key factors for further development in the sector. "New-energy automobiles might at best manage to gain a 4 percent market share in the domestic auto market by 2020. It would be better for the government to first introduce new-energy vehicles in the public transportation sector, instead of trying to boost consumption among regular consumers," said Zeng.

The history of Chinese cuisine stretches back for many centuries and produced both change from period to period and variety in what could be called traditional Chinese food, leading Chinese to pride themselves on eating a wide range of foods. Chinese people feel very proud of their various kinds of dishes. Diet is one of the most important factors in Chinese culture. There are eight cuisines in China including spicy Sichuan cuisine and light Cantonese cuisine and Chinese restaurants enjoy wide popularity all over the world. These styles are distinctive from one another due to factors such as available resources, climate, geography, history, cooking techniques and lifestyle. One style may favour the use of lots of garlic and shallots over lots of chilli and spices, while another may favour preparing seafood over other meats and fowl. Jiangsu cuisine favours cooking techniques such as braising and stewing, while Sichuan cuisine employs baking, just to name a few. Hairy crab is a highly sought after local delicacy in Shanghai, as it can be found in lakes within the region. Beijing Roast Duck (otherwise known as "Peking Duck") is another popular dish well known outside of China. Based on the raw materials and ingredients used, the method of preparation and cultural differences, a variety of foods with different flavours and textures are prepared in different regions of the country. Many traditional regional cuisines rely on basic methods of preservation such as drying, salting, pickling and fermentation.

However, the lifestyle of Chinese people is changing gradually, no matter having meals at home or dinning out, there have been brand new diet habits. For example, cheese and tomato ketchup sand maker are added into some traditional dishes and city consumers frequently visit some fast-food restaurant chains such as MacDonald’s, KFC and Pizza Hut. The market research shows that in the next few years, the consumption of western fast-food in China will keep increasing at the speed of over 45% every year while the number of Chinese fast-food restaurants is expected to increase by 15%.

People’s income is increasing constantly, and many people know more and more about international food combined with the convenience of supermarket shopping impact crusher so that a new generation of consumers that prefer to try packaged and battled food appeared in China. With the fact that more and more households have fridges and constant increase of frozen food in the supermarket, everything that you need ranging from quick frozen dumplings to fried chips can be found in the supermarket. In addition, green and organic food also shows in the shops in the big cities while the price is more expensive compared with traditional food. Because of the change of lifestyle, more and more Chinese people are not willing to purchase food every day, which makes packaged food more easily for the common people to accept. More and more people having cars and new city districts springing up, supermarkets are becoming more and more popular.